Nutanix Certified NCP-MCI-6.5 Dumps Questions Valid NCP-MCI-6.5 Materials
Current NCP-MCI-6.5 Exam Dumps [2024] Complete Nutanix Exam Smoothly
The NCP-MCI-6.5 certification exam covers a range of topics related to Nutanix's multicloud infrastructure solutions, including virtualization, storage, networking, and security. NCP-MCI-6.5 exam tests the candidates' knowledge of Nutanix features such as AHV, Prism, Flow, Calm, and Era, and their ability to deploy, manage, and troubleshoot Nutanix clusters. NCP-MCI-6.5 exam also covers topics related to integrating Nutanix clusters with public and private clouds, such as AWS, Azure, and VMware.
The NCP-MCI-6.5 exam is intended for IT professionals, including administrators, engineers, and architects, who work with Nutanix solutions in a multicloud environment. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification exam is ideal for those who want to demonstrate their expertise in implementing and managing Nutanix solutions across multiple cloud platforms, including public, private, and hybrid clouds. By passing NCP-MCI-6.5 exam, candidates will gain a deep understanding of Nutanix technology and its applications in a multicloud environment, making them valuable assets to any organization that uses Nutanix solutions.
NEW QUESTION # 82
Which node type does not deploy a Nutanix Controller VM?
- A. Storage Only
- B. Compute Only
- C. Hyper Converged
- D. All Flash
Answer: B
Explanation:
A Compute Only node is a node that does not have any local storage devices and only provides compute resources to the cluster2. A Compute Only node does not run a CVM, but instead relies on the CVMs of other nodes to access the distributed storage fabric2
NEW QUESTION # 83
An administrator needs to deploy an application with a large amount of data connected via Nutanix volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
- A. Enable thick provisioning on the Volume Group(s)
- B. Distribute workload across multiple virtual disks
- C. Use multiple subnets for iSCSI traffic
- D. Enable RSS (Receive Side Scaling)
Answer: B,D
NEW QUESTION # 84
Which best practice should be followed when creating a bond in a Nutanix cluster?
- A. Configure the bond to use LACP
- B. Only utilize NICs of the same speed within the same bond
- C. Use the default bond configuration after installation
- D. Place NICs of different speeds within the same bond
Answer: D
NEW QUESTION # 85
An administrator was reviewing various AOS logs when a it was noticed that the time of the logs were off by several hours.
Which initial step was missed during the post process cluster configuration?
- A. Setting the cluster time zone via PE GUI
- B. Setting the cluster time zone via CVM NCLI
- C. Setting the cluster time zone via CVM ACLI
- D. Setting the cluster time zone via PC GUI
Answer: B
Explanation:
The cluster time zone is a setting that determines the time zone used by all CVMs in the cluster. The cluster time zone affects the timestamps of Nutanix logs, events, alerts, and reports. The cluster time zone also affects the scheduling of tasks such as snapshots, replication, and upgrades. By default, the cluster time zone is set to UTC (Coordinated Universal Time) when the cluster is created3.
To change the cluster time zone, the administrator needs to use the ncli (Nutanix command-line interface) on any CVM in the cluster. The steps are as follows4:
Log in to any CVM using SSH.
Run ncli cluster get-timezone to check the current cluster time zone.
Run ncli cluster set-timezone timezone=<timezone> to change the cluster time zone, where <timezone> is a valid time zone identifier (for example, America/New_York).
Run ncli cluster get-timezone again to verify that the cluster time zone has been changed.
Note that changing the cluster time zone does not affect the time zone of Prism Element or Prism Central VMs. To change their time zone, the administrator needs to use Prism Element UI or Prism Central UI respectively5.
NEW QUESTION # 86 
The Update Source for LCM has been configured as shown in the exhibit. Inventory is failing consistently.
What is the likely cause of this issue?
- A. The administrator does not have a valid portal account.
- B. The license assigned to the cluster has expired.
- C. Port 433 Is blocked by a firewall.
- D. Port 80 is blocked by a firewall.
Answer: C
NEW QUESTION # 87
Refer to the exhibit.
An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster running, configured with appropriate IP addresses, and br0-up has been configured the same the existing uplink bonds When attempting to add the node to the cluster with the Expand Cluster function in Prism , the cluster is unable to find the new node.
Based on the above output from the new node, what is most likely the cause of this issue?
- A. The existing and the expansion node are on different VLANs.
- B. The ports on the upstream switch are not configured for LACP.
- C. There is a firewall blocking the discovery traffic from the tlu
- D. LACP configuration must be completed after cluster expansion
Answer: A
NEW QUESTION # 88
Which component can be associated with a storage policy?
- A. Vm
- B. Catalog
- C. Category
- D. Subnet
Answer: A
Explanation:
A storage policy can be associated with a VM. A storage policy is a set of rules that define how data objects are stored and protected. It specifies the characteristics of storage, data protection, and data placement for virtual disks that are assigned to a VM. Subnets, catalogs, and categories are not associated with storage policies.https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-vpc_2022_6:mul-cluster-storage-policy-summary-view-pc-r.html
NEW QUESTION # 89
On a Nutanix cluster, what does Network Segmentation refer to?
- A. Isolating intra-cluster traffic from guest VM traffic.
- B. Physically separating management traffic from guest VM traffic.
- C. Isolating management traffic from storage replication traffic.
- D. A distributed firewall for security VM to VM traffic.
Answer: A
Explanation:
network segmentation on Nutanix clusters refers to creating a separate network for service-specific communication and isolating different types of traffic over selected VLANs or physical interfaces.
https://next.nutanix.com/ncm-intelligent-operations-formerly-prism-pro-ultimate-26/network-segmentation-isola
https://next.nutanix.com/how-it-works-22/network-segmentation-basics-38414
NEW QUESTION # 90
What is a requirement to enable Flow Networking?
- A. A dedicated virtual switch has been created for Flow Networking.
- B. Flow Micro segmentation must be enabled.
- C. Prims Central is using a three-node scale-out deployment
- D. Microservices infrastructure must be enabled.
Answer: D
Explanation:
Flow Networking is a feature that enables software-defined networking for AHV clusters. It allows users to create and manage virtual private clouds (VPCs), subnets, and network services such as NAT, DHCP, routing, and VPN. Flow Networking also supports service insertion and chaining, which enables integration with third-party network functions such as firewalls and load balancers. Flow Networking is built on top of the microservices infrastructure (MSP) in Prism Central, which provides the platform for running various Nutanix services such as Calm, Karbon, and Objects. Therefore, to enable Flow Networking, the MSP must be enabled first on Prism Central1. The MSP can be enabled from the Prism Central settings page or from the command line interface (CLI) of the Prism Central VM2. Enabling the MSP will also enable Flow Microsegmentation, which is another feature that provides network security and visibility for AHV clusters.
NEW QUESTION # 91
Which scenario would benefit most from Erasure Coding being enabled on a container?
- A. VDI use cases where a single VM is cloned 100's of times
- B. Long term storage of data which is written once and read infrequently
- C. High performance database where all is relatively hot.
- D. WEB and API Servers
Answer: B
Explanation:
The correct answer is A. Long term storage of data which is written once and read infrequently.
Erasure Coding is a feature that increases the usable capacity on a Nutanix cluster by reducing the amount of data replication. Instead of replicating data, Erasure Coding uses parity information to rebuild data in the event of a disk failure. The capacity savings of Erasure Coding is in addition to deduplication and compression savings1.
Erasure Coding is most beneficial for scenarios where the data is written once and read infrequently, such as long term storage of archival data, backup data, or cold data. This is because Erasure Coding has some trade-offs and limitations that may affect the performance and availability of the cluster. Some of these trade-offs and limitations are2:
Erasure Coding requires more CPU and memory resources than replication, as it involves more complex calculations for encoding and decoding data.
Erasure Coding increases the network bandwidth consumption, as it involves more data transfers between nodes for encoding and decoding data.
Erasure Coding reduces the resiliency of the cluster, as it can tolerate fewer node failures than replication. For example, a cluster with redundancy factor 2 can tolerate one node failure with replication, but only two disk failures with Erasure Coding.
Erasure Coding is not effective for workloads that have many overwrites or random writes, as it involves more overhead for updating the parity information.
Erasure Coding is not supported for some features, such as volume groups, file server VMs, or Metro Availability.
Therefore, if an administrator needs to configure a container on a Nutanix cluster, they should enable Erasure Coding only if the container will store data that is written once and read infrequently. This way, they can maximize the capacity savings of Erasure Coding without compromising the performance and availability of the cluster.
NEW QUESTION # 92
The Linux administration team has requested access rights to any current or future Linux VM in the environment What entity should be selected when assigning this new role?
- A. Image
- B. AHV Cluster
- C. Project
- D. Category
Answer: C
NEW QUESTION # 93
What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
Answer:
Explanation:
NEW QUESTION # 94
An administrator needs to limit the amount of storage space that data stored in single container can consume.
Which action should the administrator take?
- A. Thick prevision the container
- B. Set an advertised capacity for the container
- C. Store VM snapshots in a different container
- D. Enable reservation for rebuild capacity
Answer: B
Explanation:
The best way for the administrator to limit the amount of storage space that data stored in a single container can consume is to set an advertised capacity for the container. This will ensure that the data stored in the container doesn't exceed the set limit, and it will also help prevent any potential performance issues due to resource contention. Additionally, the administrator should consider thick provisioning the container, which will pre-allocate the amount of storage space that can be used by the container. This will help ensure that the data stored in the container doesn't exceed the advertised capacity.
NEW QUESTION # 95
Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?
- A. Redirect-On-Write
- B. Split-mirror
- C. Continuous Data Protection
- D. Copy-on-Write
Answer: A
NEW QUESTION # 96
After running an LCM inventory it is noticed that there are a number of firmware and software updates available. The administrator would like to avoid any host reboots, but would like to apply some of the available updates?
Which two updates can be done while avoiding a host reboot? (Choose two.)
- A. AOS
- B. Data Drives
- C. M.2 Drives
- D. AHV
Answer: A,C
Explanation:
AOS and M.2 Drives are two updates that can be done while avoiding a host reboot. AOS is the Acropolis Operating System that includes the hypervisor, storage and management components of the Nutanix cluster, and firmware and software updates can also be applied to it without requiring any host reboots
NEW QUESTION # 97
What is he recommended approach for a constrained VM?
- A. Increase the VM resources.
- B. Reboot the VM
- C. Decrease the VM resources
- D. Delete the VM.
Answer: A
NEW QUESTION # 98
Which two access protocols are supported by Files? (Choose two.)
- A. ISCSI
- B. NFS
- C. SMB
- D. FCOE
Answer: B,C
Explanation:
According to the Network File System web search result3, NFS (Network File System) is a distributed file system protocol that allows a user on a client computer to access files over a network in a manner similar to how local storage is accessed. NFS is one of the access protocols supported by Files. According to the
[MS-WPO]: File Access Services Protocols web search result4, SMB (Server Message Block) is a Windows file sharing protocol that enables applications to discover, access, and share files that are hosted on or made available by a file server, using a network between them, in a secure and managed environment. SMB is another access protocol supported by Files. Therefore, SMB and NFS are two access protocols supported by Files.
NEW QUESTION # 99
Refer to Exhibit:
An administrator needs to enable inline deduplication for a pre-existing storage container. When trying to enable deduplication on the storage container. this feature is grayed-out.
What is the reason for this behavior?
- A. The cluster has hybrid storage and deduplication is supported only on all-flash clusters.
- B. The cluster has less than 5 nodes which is the minimum node-count to enable deduplication.
- C. Replication Factor 1 is configured on the storage container.
- D. Capacity reservation is not enabled on the storage container.
Answer: A
Explanation:
Nutanix supports two types of deduplication: post-process and inline. Post-process deduplication runs periodically on a schedule and can be enabled on any cluster. Inline deduplication runs in real time before data is written to disk and can be enabled only on all-flash clusters.
Therefore, by checking the type of storage and the type of deduplication, you can determine if you can enable inline deduplication on a storage container or not.
Nutanix inline deduplication is a feature that reduces the stored size and avoids duplicate data on a storage container1. It is recommended only on some specific scenarios, such as when using Nutanix Files or virtual desktop infrastructure (VDI) workloads12.
NEW QUESTION # 100
......
The NCP-MCI-6.5 certification exam is a proctored exam that consists of 60 multiple-choice questions. Candidates are given 90 minutes to complete the exam. NCP-MCI-6.5 exam is available in English and Japanese languages. The passing score for the exam is 300 out of 500.
NCP-MCI-6.5 Premium PDF & Test Engine Files with 175 Questions & Answers: https://exams4sure.actualcollection.com/NCP-MCI-6.5-exam-questions.html